Epoxy Floors, ESD Epoxy Floors, Urethane Floors, Decorative Epoxy Floors, Poured Floors, Resurfacers

Epoxy Floors: Resurfacers/LDR Slurry Systems

StaticLogic resurfacers are typically designed for application over old or owrn concrete or as an protective overlayment on new concrete. They turn old floors into safer, more aesthetically appealing surfaces. In addition to concrete, these toppings are formulated to be applied over wood and metal surfaces.

Common environments for resurfacers include areas with heavy forklift and steel-wheel cart traffic; areas exposed to abrasion, impact and spills of acids, caustics, solvents, grease, oil and food; wet process areas requiring skid resistance; and clean rooms where dust cannot be tolerated.

The resurfacer product line offers a solution for every environment. StaticLogic offers systems with higher fill rations for thermal resistance, lower fill rations for high-wear and chemical resistance, and metallic-filled for excessive wear and impact resistance. One resurfacer cannot meet all of these demands.

Highest Resin Content in Industry
Full Product Line to Choose From
For Application Over Old/Worn or New Concrete
Protective Overlayment on New Concrete
Also for Application Over Wood & Metal Substrates
Turns Old Floors Into Safer, Aesthetically Appealing Surfaces
100% Solids as Supplied
Highest Compressive Strength in Industry

ESD Primers

Chemi-LDRTM 610 Light-Duty Slurry Resurfacer
A high-gloss, slurry resurfacer for light-duty applications, Chemi-LDR 610 provides durability, impact resistance and high bond strength to concrete. It is designed for floors that are too rough for a thin-film or high-build coating or sealer, but which have not deteriorated to the point where a heavy-duty floor resurfacer is needed to repair them.

Chemi-TopTM 300 General-Purpose Resurfacer
Chemi-Top 300 is an economical resurfacer for use over concrete in general-purpose applications. It also offers good chemical resistance and excellent value. Typically applied at 3/16", this resurfacer is designed for hand trowel and power trowel applications.

Chemi-TopTM 700 Premium Resurfacer
Chemi-Top 700 is a high-strength resurfacer designed for applications requiring greater durability. It offers good abrasion, impact and chemical resistance, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16", it also offers excellent value for a premium resurfacer.

Chemi-TopTM 710 Chemical-Resistant Resurfacer
Chemi-Top 710 is a high-strength resurfacer with high chemical resistance. Chemi-Top 710 provides increased resistance against solvents and acids, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16".

Chemi-TopTM 720 TSR Thermal Shock Resurfacer
Chemi-TSR 720 is Krypton Floors Floor Company's chemical-resistant, 100% solids monolithic epoxy floor resurfacer primarily designed for applications up to 1800F. Chemi-TSR 720 utilizes a cycloaliphatic amine curing agent which gives it chemical resistant properties superior to typical epoxy resurfacers. It also consists of a flexible hydrophobic epoxy binder that is resistant to thermal and mechanical shock associated with daily hot and cold water washing.

Chemi-TopTM 730 Thermal Shock Polyurethane Resurfacer
Chemi-730 is Krypton Floor's chemical-resistant, solvent-free, monolithic urethane polymer resurfacer primarily designed for applications demanding thermal-shock resistance. The Chemi-Top 730 system withstands temperatures up to 2500F and is formulated to offer superior chemical, abrasion, impact and thermal shock resistance. This sytem is self-leveling, (1/4" to 3/8") thick, designed to be applied directly to concrete.

Super Chemi-TopTM 900 High-Performance Resurfacer
Krypton Floors Super Chemi-Top 900 is designed to withstand the rigors of heavy-wheeled traffic in dock, manufacturing and other high-abuse areas. It provides unsurpassed protection of concrete, even in the harshest manufacturing environments. The addition of proprietary fillers to Krypton Floors's proven epoxy flooring chemistry delivers abrasion resistance up to 50% higher than traditional, industrial epoxy floor resurfacers. Applied at 3/16".

Typical Physical Properties

	LDR 610	CT 300	CT 700	CT 710	CT 720	CT 730	CT 900
COMPRESSIVE STRENGTH ASTM C 579-A	11,000 psi (75.4 MPa)	10,000 psi (68.5 MPa)	15,000 psi (103.0 MPa)	15,000 psi (103.0 MPa)	6000 (41.0 MPa)	7125 (49.0 MPa)	14,000 psi (96.0 MPa)
FLEXURAL STRENGTH ASTM C 580	10,000 psi (68.5 MPa)	3,200 psi (22.0 MPa)	4,000 psi (27.4 MPa)	4,000 psi (27.4 MPa)	2,100 psi (14.4 MPa)	2,500 psi (54.3 MPa)	4,400 psi (75.4 MPa)
TENSILE STRENGTH ASTM C 307	6,000 psi (41.0 MPa)	2,000 psi (13.7 MPa)	2,000 psi (13.7 MPa)	2,000 psi (13.7 MPa)	1,500 (10.3 MPa)	1,000 (6.9 MPa)	2,000 psi (13.7 MPa)
IMPACT RESISTANCE ASTM D 2794 Gardner	16 in. -lbs (18 cm-kg)	12 in. -lbs (14 cm-kg) direct & reverse	16 in. -lbs (18 cm-kg)	16 in. -lbs (18 cm-kg)	60 in. -lbs (69 cm-kg)	28 in. -lbs (32 cm-kg)	16 in. -lbs (18 cm-kg)
EFFECTIVE SHRINKAGE ASTM C 883	passes	passes	passes	passes	passes	passes	passes
THERMAL COMPATIBILITY ASTM C 884	passes	passes	passes	passes	passes	passes	passes
ADHESION: CONCRETE ASTM D 4541 Elcometer	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure
Abrasion Resistance ASTM D 4060 Taber Abraser. 1000 gm. load per wheel	CS-17 Wheels 50-65 mgs/ 1000 cycles	H-10 Wheels 400 mgs/ 1000 cycles	H-10 Wheels 320 mgs/ 1000 cycles	H-10 Wheels 300 mgs/ 1000 cycles	H-10 Wheels 350 mgs/ 1000 cycles	H-10 Wheels 212 mgs/ 1000 cycles	H-10 Wheels 265 mgs/ 1000 cycles
FLAMMABILITY ASTM D 635	self- extinguishing	self- extinguishing	self- extinguishing	self- extinguishing	self- extinguishing	self- extinguishing	self- extinguishing
% SOLIDS	100	100	100	100	100	100	100
Additional Information: Resurfacer Flooring System Specifications