Epoxy Floors, ESD Epoxy Floors, Urethane Floors, Decorative Epoxy Floors, Poured Floors, Resurfacers

Epoxy Floors: Polyurethane Coatings

When high gloss, stain resistance and abrasion resistance are critical, Krypton Floors' premium urethane coatings are an excellent choice. Krypton Floors' urethanes are two-component, thus curing independently of relative humidity to a high-gloss finish. The complete product line allows Krypton Floors to formulate a system directly to meet your needs -- non-skid or smooth, glossy or satin, high chemical resistance to reduced chemical resistance, high wear resistance to normal wear resistance. Tell Krypton Floors your problem and we'll design a system to meet your needs.

UV Light Resistance
High Gloss to Satin Finish
Excellent Abrasion Resistance
Unsurpassed Stain Resistance
Two-Component
Light Reflectance for Illumination of Workplace
Excellent Gloss Retention

General-Purpose Epoxy Coatings

UR 9100 Polyurethane Coating
New UR 9100 is your new best choice for extremely abrasion resistant, low odor, high solids polyurethane flooring. UR 9100 is a three-component aliphatic polyurethane coating that offers advanced protection AND low odor, low VOC safety (less than 150 grams/liter). This high-solids, abrasion resistant floor coating is formulated to wear 2x longer than traditional urethane floor coatings. The coating contains proprietary, hard fillers which increase abrasion resistance.

UR 9100 is designed for use in very high traffic areas such as truck loading docks,warehouses and high traffic aisle ways. This versatile coating may be installed with a a beautiful satin or high gloss finish and makes an excellent clear topcoat for decorative applications.

WBUR 8000/8900
The WBUR 8000/8900 Chemi-Cote series are odorless two and three component VOC compliant aliphatic waterborne polyurethane coatings. These coatings provide excellent chemical resistance, stain resistance and UV stability, as well as excellent sealing and adhesive properties.

UR 1000 Polyurethane Coating
UR 1000 is a high-gloss, aromatic polyether polyurethane coating. This economical coating offers better chemical resistance and gloss retention than an epoxy at comparable pricing. This coating can be applied directly to concrete with a special additive.

UR 3000 Polyurethane Coating
UR 3000 is a high-gloss, non-yellowing, aliphatic polyether polyurethane coating that resists most stains while offering good abrasion and chemical resistance. This topcoat is ideal for airport hangars and warehouses and similar industrial/commercial applications.

UR 5000 Polyurethane Coating
A UV-stable, aliphatic polyester polyurethane coating, UR 5000 has excellent abrasion, impact and chemical resistance against staining, including tire stains. In addition, UR 5000 has excellent gloss and light refelctance for better illumination of the workplace. Ideal for airport hangars, cleanrooms, laboratories, warehouses and similar industrial/commercial applications.

Ever-Wear TM 1000 Polyurethane Coating
Ever-Wear 1000 is a high-wear, aromatic, polyether polyurethane coating that has a satin appearance and a slight non-skid finish. It offers excellent wear resistance and good chemical resistance. This coating can be applied directly to concrete when used with a special additive.

Typical Physical Properties

	WBUR 8000	WBUR 8900	UR 1000	UR 3000	UR 5000	Ever-Wear 100-	UR 6100
%Solids (By Volume) As Supplied	45	47	54	54	52	58	96
Gloss 60°	90+	20-40	80-90	80-90	90+	60-70	90+
Abrasion Resistance ASTM D 4060 Taber Abraser. 1000 gm. load per wheel	CS-17 Wheels 45-55 mgs/ 1000 cycles	CS-17 Wheels 45-55 mgs/ 1000 cycles	CS-17 Wheels 50-60 mgs/ 1000 cycles	CS-17 Wheels 40-50 mgs/ 1000 cycles	CS-17 Wheels 30-35 mgs/ 1000 cycles	CS-17 Wheels 35-40 mgs/ 1000 cycles	CS-17 Wheels 65-85 mgs/ 1000 cycles
Impact Resistance ASTM D 2794	140 in.-lbs (157 cm-kg) 100 in.-lbs.(rev) (112 cm-kg)	140 in.-lbs (157 cm-kg) 100 in.-lbs.(rev) (112 cm-kg)	140 in.-lbs (157 cm-kg) 100 in.-lbs.(rev) (112 cm-kg)	140 in.-lbs (157 cm-kg) 100 in.-lbs.(rev) (112 cm-kg)	140 in.-lbs (157 cm-kg) 100 in.-lbs.(rev) (112 cm-kg)	100 in.-lbs (112 cm-kg) direct & reverse	160 in.-lbs (179 cm-kg) direct & reverse
Flexibility ASTM D 522 Conical Mandrel	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes	1/8 in. (.31 cm) passes
Hardness ASTM D 3363 Pencil	2B	2B	2H	2B	2H-3H	2H	N/A
Adhesion: Concrete ASTM D 4541 Elcometer	Cannot be applied directly to concrete	Cannot be applied directly to concrete	350 psi (2.4 MPA) concrete failure	Cannot be applied directly to concrete	Cannot be applied directly to concrete	350 psi (2.4 MPA) concrete failure	Cannot be applied directly to concrete

Epoxy and Urethane Products:

Primers

Epoxy Coatings

Polyurethane Coatings

Krypton Floors, Inc.
824 Manatee Ave. West #70
Bradenton, Florida 34206

P: 833.568.8856
F: 941.777.3700
sales@staticlogicllc.com