Epoxy Floors, ESD Epoxy Floors, Urethane Floors, Decorative Epoxy Floors, Poured Floors, Resurfacers

Epoxy Floors: Waterborne Coatings

For applications requiring low VOC and low odor, Krypton Floors offers waterborne, environment-friendly coatings. These durable coatings have physical properties comparable to solvent-based coatings, but without the volatile organic content. These moisture permeable coatings offer improved resistance to damage from moisture.

Waterborne coatings provide excellent topcoats in areas where reduced odor and moisture tolerance is essential. The waterborne coatings are permeable, allowing a limited amount of moisture to transmit through the coating. The moisture transmission reduces the effect of osmotic pressure.

Low VOC & Low Odor
Environmentally Friendly
Easy to Apply
Sprayable
Long Lasting & Very Durable
Moisture Permeability Offers Improved Resistance to Damage from Moisture

Corrosion Control Coatings

WB Primer Waterborne Primer
This primer is ideal for applications requiring a waterborne urethane or epoxy topcoat. It provides high bond strength, good flexibility, moisture resistance and chemical resistance.

WB 1000 Waterborne Epoxy
Chemi-Cote WB 1000 is a two-component, high-gloss, waterborne epoxy resin coating. It is designed to provide excellent adhesion to and sealing of concrete, with good physical and chemical properties.

WBUR 7000 Waterborne Urethane
Chemi-Cote WBUR 7000 is a low-odor, waterborne, single component, aliphatic polyurethane. It has excellent chemical resistance, stain resistance (resists tire stains) and UV stability, as well as excellent sealing and adhesion properties. With its satin to semi-gloss finish, WBUR 7000 offers the benefits of a urethane without the solvent content.

Typical Physical Properties

	WB Primer	WB 1000	WBUR 7000
Abrasion Resistance ASTM D 4060 Taber Abraser. 1000 gm. load per wheel	CS-17 Wheels 120 mgs/ 1000 cycles	CS-17 Wheels 120 mgs wt. loss/ 1000 cycles	CS-17 Wheels 90-12050-65 mgs/ 1000 cycles
Impact Resistance ASTM D 2794	80 in.-lbs (89.6 cm-kg) direct & reverse	80 in.-lbs (89.6 cm-kg) direct & reverse	16120 in.-lbs 134 cm-kg) direct & reverse
Flexibility ASTM D 522 Conical Mandrel	1/8 in. (.31 cm) failure	1/8 in. (.31 cm) failure	1/8 in. (.31 cm) failure
Hardness ASTM D 3363 Pencil	2B	2B	2H
Adhesion: Concrete ASTM D 4541 Elcometer	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPa) concrete failure	350 psi (2.4 MPA) concrete failure
%Solids (By Volume) As Supplied	30-35	37	52

Epoxy and Urethane Products:

Primers

Epoxy Coatings

Polyurethane Coatings

Krypton Floors, Inc.
824 Manatee Ave. West #70
Bradenton, Florida 34206

P: 833.568.8856
F: 941.777.3700
sales@staticlogicllc.com